Rainwater Outlet
Our Rainwater Outlet complete with a Leaf Guard is a flat roof drainage outlet used for internal rainwater outlets.
Available in 60mm, 80mm and 100mm external pipe diameters.
Rainwater Flashing Kit and Techno Primer are needed to seal this product.
Couldn't load pickup availability
 |
Step 1Place rainwater outlet through the pre-cut hole and mark around it using a crayon or similar. |
 |
Step 2Apply primer the underside of the rainwater outlet and 1cm beyond the marked area on the rubber using a quick scrubber pad and handle. Allow both surfaces to dry. |
 |
Step 3Mate the surfaces together and compress with silicone roller. |
 |
Step 4Round the corners of the 12” flashing tape (Rainwater flashing kit) with scissors and neatly position over outlet. Mark the perimeter with crayon. |
 |
Step 5Apply primer to the rubber and outlet using the scrubber pad and handle and extend primer beyond the crayon line by 2cm. |
 |
Step 6Once touch dry, neatly position the 12" flashing tape and carefully remove the backing paper. Roller firmly in place and use a sharp blade to carefully cut out the hole. |
Courier Delivery
Order by 2.30 pm for same day dispatch (UK mainland only) and typically delivered next working day.
| Spend | Delivery Charge |
| Spend up to £149.99 | £20 (£24 inc vat) |
| Spend £150.00 to £199.99 |
£25 (£30 inc vat) |
| Spend £200.00 to £349.99 | £30 (£36 inc vat) |
| Spend over £350.00 | Free delivery |
Please note delivery charges and free delivery is for the UK mainland only. Some deliveries to Islands, Scottish Highlands and other mainland postcodes may incur a further charge.
We are unable to ship to any of the Channel Islands (Guernsey/Jersey/Sark) and Ireland.
Collection
Free from our headquarters in High Wycombe.
Order by 4pm for same day collection.
If you need assistance, don't hesitate to contact us at info@rubbaseal.co.uk or 01494 461711.
UK's number 1 EPDM supplier
Find out more about the Techno Rubber Company and their award winning rubber membranes.
