Internal Corner Installation Guide
Step-by-step guide on installing an internal corner to your next rubber roofing project.
You can download this guide as a PDF here
 |
Step 1Adhere one of the upstands and apply contact adhesive to the remaining rubber and upstand as shown. Draw a 45-degree line from the corner outwards. |
 |
Step 2Once dry, mate the EPDM as shown, up to the line. Fold the remaining section of rubber to form a neat triangular flap that will neatly dress into the internal corner. |
 |
Step 3Apply primer with a quick scrubber pad and handle, allow to dry. |
 |
Step 4Mate the surfaces together and roller. |
