Edge Trims Installation Guide
Step by step guide on installing Rubber Roofing edge-trims to your next EPDM Roofing project.
 |
Step 1Install a 2" x 1" batten to the roof perimeter, level with roof deck. |
 |
Step 2Once the membrane is installed, push down on the edge trim. |
 |
Step 3Fix in place using the supplied polypins. |
 |
Step 4Trim any excess rubber with a sharp blade. |
 |
Step 5Please allow 5mm gap between trims for expansion and contraction. |
Watch our video
