Onto Tiles Installation Guide

Step by step guide on installation EPDM membrane onto tiles. Installation videos & step-by-step guides for full installation available.

You can download this guide as a PDF here

	Step 1 Allow 150mm overhang onto tiles.
	Step 2 Dress lead into place 6” onto tiles, 3” onto the deck. We recommend using minimum 9” Code 4 lead cut into 1200mm lengths max.
	Step 3 Fix into position using screws.
	Step 4 Apply primer to lead and rubber approx. 160mm wide using scrubber pad and handle. Allow to go touch dry.
	Step 5 Centralize the 6" batten cover strip and carefully remove release paper applying downward pressure. Use silicone roller to seal.