![]() |
Step 1Cut chase in the wall then thoroughly clean the wall, chase and rubber. |
![]() |
Step 2Apply a thin coat of contact adhesive to the rubber and the wall. |
![]() |
Step 3Once touch dry, starting at the bottom, carefully mate the surfaces together. Smooth by hand and silicone roller. |
![]() |
Step 4Trim membrane. |
![]() |
Step 5Position a piece of 9” flashing tape or a Detail Kit as shown and mark the perimeter, allowing an extra 1cm. |
![]() |
Step 6Apply primer to the marked area using a scrubber pad and handle, allow primer to become touch dry. |
![]() |
Step 7Peel back a section of backing paper and, starting from the top, slowly work downwards as shown. |
![]() |
Step 8Apply a gentle heat source to the corner if needed. |
![]() |
Step 9Thoroughly roller with Silicone and Penny Rollers. |
![]() |
Step 10Insert wall trim into chase and secure at 600mm centres with the supplied fixings. Rawplugs are not needed if a 5.5mm masonry drill bit is used. |
![]() |
Step 11Thoroughly seal chase with Wall Mastic. |
Courier Delivery
Order by 2.30 pm for same day dispatch (UK mainland only) and typically delivered next working day.
| Spend | Delivery Charge |
| Spend up to £149.99 | £20 (£24 inc vat) |
| Spend £150.00 to £199.99 |
£25 (£30 inc vat) |
| Spend £200.00 to £349.99 | £30 (£36 inc vat) |
| Spend over £350.00 | Free delivery |
Please note delivery charges and free delivery is for the UK mainland only. Some deliveries to Islands, Scottish Highlands and other mainland postcodes may incur a further charge.
We are unable to ship to any of the Channel Islands (Guernsey/Jersey/Sark) and Ireland.
Collection
Free from our headquarters in High Wycombe.
Order by 4pm for same day collection.
If you need assistance, don't hesitate to contact us at info@rubbaseal.co.uk or 01494 461711.
UK's number 1 EPDM supplier
Find out more about the Techno Rubber Company and their award winning rubber membranes.










